|Jochen's High Voltage Page|
After burning out the my first secondary (see tesla coil link), it became necessary to produce a new tesla coil system, and I took the opportunity to increase it somewhat in size and power. This is the current state, not yet optimal.
The new tesla coil system in operation. Streamers are about 1m long.Click on image for larger version.
|Schematic drawing of the spark gap. The tube is cut into pieces after alignment. Voltage is applied at the first and last piece. One end is closed, to the other end a vacuum cleaner is attached. Air is then sucked through the gaps into the tube pieces and into the vacuum cleaner.|
This document is copyrighted. All rights reserved. No part of this document may be reproduced without my permission. Permission to copy and publish this document or parts of it on the WWW is granted until explicitely revoked, under the condition that it is accompanied by this or a simliar copyright notice, including my name and the original URL.